How To Install a Ring Doorbell in 5 Easy Steps

In today’s digital era, the safety of our homes and the convenience of modern technology are seamlessly merging. The Ring Doorbell represents a significant advancement in smart home technology. The Ring Doorbell offers homeowners a robust way for enhancing their security.

This blog will cover:

• Tools & Material Required For Ring Doorbell Installation.
• 5 Easy Steps For Doorbell Installation.

Let’s get started!

What Tools & Material You Need For Ring Doorbell Installation?

Before you begin the Ring Doorbell installation, it's important to ensure you have all the necessary tools and materials on hand. This will not only streamline the process but also prevent any interruptions once you start. Here is a detailed breakdown of what you’ll need to successfully install your Ring Doorbell:

Screwdrivers:

• Phillips Screwdriver: For general use and adjustments.
• Ring’s Special Screwdriver: Specifically designed for security screws.

Drill and Bits:

Power Drill: Necessary for creating holes in hard surfaces like brick or concrete.

Drill Bits

• Masonry Bit: For concrete or brick.
• Standard Bit: For wood or vinyl.

Leveling Tool:

Ensures the doorbell is installed straight, usually included in the Ring package.

Marking Tools:

Pencil or marker to mark drilling spots on the wall.

Installation Components:

• Mounting Bracket: The base on which the doorbell is mounted.
• Screws and Wall Anchors: For securing the mounting bracket to various surfaces.
• Security Screw: Keeps the doorbell unit attached to the bracket securely.

Connection Materials (if applicable):

• Wire extensions and wire nuts are needed for connecting a wired doorbell to existing wiring.

Charging Equipment:

• Charging cable for battery-powered models to ensure the doorbell is charged prior to installation.

Optional Accessories:

• Corner Kit or Wedge Kit: Used to angle the doorbell for optimal viewing.
• Sealant: Helps waterproof the installation, especially in outdoor areas prone to moisture.

How To Install a Ring Doorbell in 5 Easy Steps

Here's a step-by-step guide to help you set up ring doorbell:

Step 1: Prepare Your Installation Kit

Begin by carefully unboxing your Ring Doorbell package. Make sure all the necessary components are included:

• Ring Doorbell Device: This is your main unit that will be mounted outside.
• Mounting Bracket: This hardware secures the doorbell to your home’s exterior.
• Screws and Wall Anchors: These are used to attach the mounting bracket securely to various types of walls.
• Level Tool: Crucial for ensuring your installation is perfectly horizontal.
• Charging Cable: Needed to charge the battery unit.
• Ring Screwdriver: Specifically designed to fit the unique screws used by Ring devices.
• User Manual: Contains specific instructions, warranty information, and customer support numbers.

Lay out all the items on a clean, flat surface to check that nothing is missing or damaged. Familiarize yourself with the setup process as outlined in the user manual.

Step 2: Charge the Battery

For battery-powered models:

• Connect the Battery to the Charger: Plug the charging cable into the battery and then connect it to a power source. The charging status is typically indicated by an LED light on the battery.
• Wait for Full Charge: Charging times can vary, so refer to the user manual for specific details. A full charge is usually indicated by the LED light turning green.
• Insert the Battery into the Doorbell: Once charged, insert the battery into the designated compartment on the Ring Doorbell device. Ensure it snaps securely into place.

Step 3: Install the Mounting Bracket

This step is critical for the stability and functionality of your Ring Doorbell:

• Determine the Best Position: Choose a location that provides a clear view of your entryway without any obstructions. Avoid direct sunlight on the camera lens and any potential interference from nearby metal structures, which can impair Wi-Fi signals.
• Level and Mark: Position the mounting bracket against the wall at the desired height—about 48 inches from the ground is typical. Use the built-in level tool to adjust for evenness. Mark the drill points through the holes in the bracket using a pencil.
• Drill Holes: Drill at the marked spots. For brick, concrete, or stucco, use a masonry bit and insert the wall anchors after drilling.
• Attach the Bracket: Align the bracket with the holes and use the screws provided to secure it in place. Ensure it’s tightly fixed to prevent any movement.

Step 4: Attach the Ring Doorbell

Attaching the doorbell to the bracket is straightforward but needs careful handling:

• Slide the Doorbell onto the Bracket: Align the Ring Doorbell with the mounting bracket and gently slide it down until it clicks into place.
• Secure with Security Screw: At the bottom of the device, there’s a hole for a security screw. Insert the screw and tighten it with the Ring screwdriver to secure the doorbell against theft or tampering.

Step 5: Set Up the Ring App

The final step involves software setup, which allows you to control and monitor your Ring Doorbell remotely:

• Install the Ring App: Download and install the Ring app from the App Store or Google Play. Open the app once installed.
• Create or Access Your Account: Follow the prompts to create a new account or log into an existing one.
• Add Your Device: The app will guide you through adding a new device. Select your Ring Doorbell from the list and follow the instructions to connect it to your Wi-Fi network.
• Customize Settings: Set up features like motion detection, video recording options, and notification preferences. You can adjust these settings anytime based on your needs.

Sign Up For JB Tools Newsletter And Save 40% On Ring Doorbell Installation Tools

Are you ready to upgrade your home security with a Ring Doorbell? Sign up for the JB Tools newsletter today and unlock an exclusive discount on all the tools you'll need for your installation!

Don't miss out on this opportunity to enhance your home's security while saving on essential tools. Join our community of savvy homeowners and start your project with confidence and  get a chance to earn rewards!